Some reasons behind the Netgear extender orange light issue are technical glitches, signal interference, outdated firmware, improper power supply, weak Ethernet connection, too much distance, or perhaps you WiFi extender setup impartially. But, whatever the reason behind the issue at hand might be, troubleshooting it is quite easy. You can become certain of the same after reading the solutions given in detail in this article.
How to Resolve Netgear Extender Orange Light Issue?
Reason: Damaged Ethernet Cable Used
Check the Ethernet cable that you choose to connect the Netgear wireless range extender and the host router. Do you find that it is damaged? Nodding your head in yes? Well then, you just came across the first reason why you are experiencing the Netgear extender orange light issue. A damaged Ethernet cable is interrupting the connection flow.
Solution: Purchase New Ethernet Cable
Taking the above-mentioned reason into consideration, you should use tape to fix the cable. See in case this works for you. In case it does not, then you need to consider using a new Ethernet cable to connect WiFi extender to router. Make sure of the following points while doing what is needed:
- The Ethernet cable connection should not be loose.
- There should be zero cuts on the cable so that it does not cause issues.
Now, see if the Netgear extender orange light issue has been resolved or not. In case, you are still going crazy because of it, you need to read the next troubleshooting tip.
Reason: Wrong Connection Source Used
Chances are that you have not used an Ethernet cable to connect the Netgear wireless range extender and the host router. Instead, you have made the mistake of using a wireless source to join the networking devices. You should be aware of the fact that a WiFi source cannot be trusted when it comes to keeping the connection intact.
Solution: Use Any Other Connection Source
You should skip using a wireless source of connection to connect the networking devices further. Instead, get your hands on an Ethernet cable. Apart from keeping the connection finger-tight, it is recommended that you bear these things in mind. They will prevent you from experiencing more issues in the future:
- The distance between them should not be too much.
- Place the extender as well as the router in the same room.
However, avoid keeping the networking devices too close to each other, or else their signals will collide and force you to face continue facing the issue at hand.
Reason: Outdated WiFi Extender Firmware
Can you recall the last time you updated the firmware of your networking device? No? Well then, you just came across yet another reason why you are reading this guide. Performing firmware update ensures that the performance of the extender is at its peak. However, if the firmware is not updated, then it can also ruin the performance of the extender.
Solution: Update WiFi Extender Firmware
Update the firmware of your networking device without wasting any more time. Now, you might be wondering how you can do so, right? Well, you can refer to the instructions which are given in the user manual of the Netgear wireless range extender. There you will find the two ways through which you can update the firmware of your device. They are as follows:
- Manual method
- Nighthawk app
In the first method, you are required to access the web user interface of the networking device whereas in the second one, you need access to a mobile device.
End Note
Troubleshooting the Netgear extender orange light issue has proved to be rocket science for a number of users. Assuming you are one of them, we hope that we were able to help you to make it past tense. In case what we hoping for come true, then we suggest that you do not shy away from sharing your feedback with your fellow readers. The same can be done if you make your way to the comment section.
